Installation - Assa Abloy effeff 809-12 Notice D'installation Et De Montage

Installation

A
At tention!
Functional limitation due to faulty recess of the lock pocket: The lock pocket must be created cor-
responding to the lock pocket dimensions. You must insert the lock without using any force and screw it
into place, so that is not subject to mechanical stress.
Property damage from drilling: Drilling will damage the lock. You may only use existing holes drilled at
the factory to attach fittings. The lock must be removed if any work such as drilling or cutting is carried out
on the door leaf.
Damage from dirt: The lock is damaged by dirt. Prior to installation, the lock pocket and all holes must be
cleaned (by blowing out or vacuuming).
Functional limitation due to distorted installation: The lock must be installed free of torsion.
Functional limitation due to door handles not moving freely: The lock must be fitted in such a way that
the handle spindle and the spindle hub align.
Property damage due to violent installation of the handle pin into the follower: The door handle spin-
dle must be gently inserted into the spindle hub. No tools are needed.
Protect the door from unintended closing: The electric security lock 809 locks a closed door automatically
and can then only be unlocked again with an electric control signal or with the locking cylinder. A con-
struction locking cylinder must be installed before the electric security lock 809 is installed.
Observe the tolerances for the voltage supply: The operating voltage measured on the electric security
lock 809 at rated current consumption must lie within the specified tolerance limits. Damage and malfunc-
tions will occur if the tolerance limits are exceeded or undercut.
Danger of destruction with construction key: The use of a so-called construction key can destroy the
lock. Then the function is no longer guaranteed. Only use a suitable locking cylinder for operation of the
lock.
EN
49
Installation