Receiving A Call; During A Call; Call Waiting; Downloading The Phone Book - Kenwood KDC-BT648U Mode D'emploi

*(AM–), or +(¢) on the remote
controller.
Make a call.
4
■
Press the volume knob.
■
Press OK on the remote controller.
■
You can input max 25 (KDC-BT648U/
KDC-X695) / 32 (KDC-X395/ KDC-348U) digits.
Speed Dialing (Preset Dial)
Press number button (1 – 6).
2
Press the volume knob to make a call.
3
Registering to the Preset Dial Number
(Preset Memory)
Enter the phone number with reference
2
to the following:
Dial a number/ Calling a number in the call
log/ Calling a number in the Phone Book
3 Press and hold number button (1 – 6) for
about 2 seconds.
Make a Voice Dialing Call
Turn the volume knob to select "VOICE
2
RECOG", then press to enter.
"V-RECG READY" is displayed.
Press the volume knob to start voice
3
recognize.
"PB NAME" is displayed.
4
When a beep is heard, say the name within
2 seconds.
"PN TYPE" is displayed.
5
When a beep is heard, say the category
name within 2 seconds.
The recognized phone number (name) is
displayed.
Press the volume knob to make a call.
6
■
This step is the same as step 4 of the
procedure in <Calling a Number in the
Phone Book> (page 16). You can make a
call or select a category.
■
If your voice cannot be recognized, a
message is displayed. Pressing the Volume
knob allows you to retry voice input. Refer
to <Troubleshooting> (page 34).
■
Both the name and category require
registration of a voice tag. Refer to <Setting
a Voice Command> (page 20).
■
Audio sound is not output during voice
recognition.

Receiving a Call

Answering a Phone Call
/
KDC-BT648U KDC-X695
Press .
/
KDC-X395 KDC-348U
Press the volume knob.
Rejecting an Incoming Call
Press SRC.

During a Call

Disconnecting a Call
/
KDC-BT648U KDC-X695
Press .
/
KDC-X395 KDC-348U
Press SRC.
Switching to the Private Mode
Press number button 6 to switches
between Private talk ("PRIVATE TALK")
and Hands-free talk ("HANDS FREE").

Call Waiting

Answering Another Incoming Call with the
Current Call Suspended
Turn the volume knob to select
[ANSWER], then press to enter.
Continuing the Current Call
Turn the volume knob to select [REJECT],
then press to enter.
Switching between the Current Call and
Waiting Call
Press the volume knob to switches the
calling party.

Downloading the Phone Book

To download automatically
If the cell-phone supports a phone book
synchronization function, the phone
book is downloaded automatically after
Bluetooth connection.
■
Setting on the cell-phone may be required.
■
If no phone book data is found in the
unit even after the compete display, your
cell-phone may not support automatic
Continued to next page
17
English