Technical Data - AL-KO 252R Instructions De Montage

GB
Assembly instructions
Drawbar, detachable, Model 252R
Bolting the drawbar to the axle and clamp connection
L1
Fit the drawbar using an M16x130 hexagon bolt.
Bolting the drawbar to the trestle and clamping bracket
L1
Attach the clamping bracket to the frame (front edge of the assembly) using two M12 bolts.
Caution!
Observe the length ratio (L
Check the tightening torques after 100km and retighten to the prescribed values if necessary!

Technical data

Torque:
M12 85 Nm
M16 220 Nm
4
L2
: L < 2.5)!
1 2
L1
< 2,5
L2
Translation of original user instructions
Drawbar, detachable