EXPO Quadro Vino Série Manuel D'instructions page 6

QV12
QUADRO VINO has been designed to be hung on a wall. It is necessary to fix two hooks on the wall by using the appropriate plugs for the type of
wall in question (perforated brick , concrete, drywall etc. ..) and depending on the weight it can support (specified on plugs) . The manufacturer
declines any liability in regards to product installation.
The following plan illustrates how far apart the two plugs should be installed (D) . Height (H1) as indicated in the diagram refers to the suggest-
ed height to drill the plug holes (this may vary according to specific needs) . Height (H2) refers to the power socket position.
100 - 240 V
• Hang Quadro Vino by setting the hooks in the slots on the back of the case.
• Insert the plug in the socket (see safety electrical system).
• Assemble the door following the instructions given in point 6 of the general information
TEMPERATURE SETTING, USE AND OPERATION
To start refrigerating, press the main switch on the top panel of QUADRO VINO.
Internal temperature is preset between 4 to 6°C with an ambient temperature of 22 to 25°C.
The light switch is located on the left side of the case.
Problem
Device does not switch on
Cooling is not efficient
Lighting does not work
If the issue persists, please refer to our website www.exposrl.com and the following links:
Document
Exploded view
Wiring diagram
User manual
INSTALLATION
D
470 mm
155 mm
TROUBLESHOOTING
Potential cause
Device is unplugged
Ambient temperature is too high
The door is frequently opened or
closed incorrectly
The switch is in OFF position
Link
www.exposrl.com >> technical area >> parts and exploded
www.exposrl.com >> technical area >> wiring diagrams
www.exposrl.com >> technical area>> user instructions
ENGLISH
Solution
Check device is plugged in
Eliminate the causes
Switch it ON
File name
QV12 ( EV )
QV12 ( SE )
QV12 ( MI )