Grizzly Tools ARM 2033-22 Lion Set Traduction De La Notice D'utilisation Originale page 26

GB
work. In this case, check the
equipment for damage and
have it repaired if applicable.
- Ensure that all nuts, bolts
and screws are tightened
firmly and the equipment is
in safe working condition.
• Check the mower for any dam-
ages.
• Repair damaged parts as ap-
propriate.
• Do not place feet or hands near
or verwendet wird, under rotat-
ing parts. Do not stand in front
of the grass ejection hole dur-
ing sickle mowing.
• Always pull the circuit breaker/
ignition key if:
- You leave the garden de-
vice, before removing block-
ages,
- if you are examining, clean-
ing or working on the garden
device
- after a collision with a for-
eign object. Immediately
examine the device for dam-
ages and if necessary have
it repaired,
- if the garden device starts to
vibrate unusually (check im-
mediately!).
Maintenance and Storage
• When servicing the blades,
remember that they can move
even if the power source is off.
• Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe work-
ing condition.
• Check the mower for any dam-
ages.
26
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid
fingers being trapped between
the rotating blades and fixed
parts of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.
• Before you shut down the ma-
chine, let the motor cool down.
Residual Risks
Even if properly operating and
handling this electric tool, some
residual risks will remain. Due
to its construction and build, this
electric tool may present the fol-
lowing hazards:
a) Cuts
b) Ear damage if working without
ear protection.