Product Technical Features - Nice LFAB4024 Instructions Et Avertissements Pour L'installation Et L'utilisation

Product duration
The duration and average economic life of the product. The value of duration
is strongly affected by the fatigue index of the manoeuvres performed by the
automation: i.e. the sum of all factors that contribute to wear of the product
(see Table 1).
The estimation of duration is made on the basis of the design calculations and
the test results performed on prototypes. In fact, as it is an estimate, it does not
represent any guarantee regarding the effective duration of the product.
To establish the probable duration of your automation, proceed as follows:
01. Calculate the fatigue index by adding the percentage values of the items
present in Table 1.
02. In Graph A of the value just found, trace a vertical line that crosses the
curve; from this point trace a horizontal line until the "manoeuvre cycles"
line is crossed. The value determined is the estimated duration of your
product.
Example of the duration calculation of an LFAB(...) / BFAB(...) gear
motor. Refer to Table 1 and Graph A:
1) - Panel length: 3 m
2) - Panel weight: 500 kg = fatigue index: 30%.
3) - Installation in windy areas = fatigue index: 15%.
4) - Does not have other elements of fatigue.
Total fatigue index = 45%
Estimated duration = 110.000 manoeuvre cycles
RECOMMENDATIONS: • All technical features stated make reference at a room temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right to modify the
product at any time it deems necessary, however maintaining the same functionality and destination of use.
Type
Power input
Peak absorption
Maximum absorption
Peak power
Maximum power
Capacitor incorporated
Protection rating
Run
Idle speed
Speed at nominal torque
Maximum torque
Nominal torque
Functioning temperature
Cycles/hour at the nominal torque
Duration
Dimensions
Weight
(*) - Value refers to a power supply voltage of 30V.
6 – English

PRODUCT TECHNICAL FEATURES

BFAB5024
Electro-mechanical dear motors for gates and doors with hinged panels
24 V
7 A
2 A
170 W
50 W
0,8 rpm
0,65 rpm
400 Nm
100 Nm
45
Estimated between about 100.000
e 250,000 manoeuvre cycles,
according to the conditions given
in Table 1
230 mm x 206 mm x h 88 mm
15 kg (gear motor with foundation
space)
TABLE 1
Length of the panel
≥ 2.00
(m)
Weight of the panel
(kg)
≤ 150 0 %
151 ÷ 350
10 %
351 ÷ 550
20 %
551 ÷ 750 30 %
751 ÷ 900 40 %
Environmental temperature exceeding 40°C or below
0°C or humidity exceeding 80%
Blind panel
Installation in windy area
GRAPH A
250.000
200.000
150.000
100.000
50.000
LFAB4024
24 V
5 A
1,5 A
120 W
36 W
–
IP 67
from 0° to 110° or 360°
1 rpm (1,25 rpm*)
0,85 rpm
300 Nm
75 Nm
from -20 °C to +50 °C
60
375 mm x 225 mm x h 110 mm
12,5 kg
2.01 ÷ 3.00 3.01 ÷ 4.00 4.01 ÷ 5.00
Fatigue index
10 % 20 % 30 %
20 % 30 % 40 %
30 % 40 % 50 %
40 % 50 %
50 % –
15 %
20 %
15 %
fatigue index %
LFAB4000
230 V
1,5 A
1 A
340 W
180 W
7μF
0,85 rpm
0,65 rpm
500 Nm
125 Nm
20
14,3 kg
–
–