Setting The Time - KIRAMI Tubtainer 2 Instructions D'utilisation

© Kirami Oy, Finland
Choose the operation mode (Image 15):
Press " " to power on unit. Under running, the LED displays the water temperature and current
•
mode.
Press " MODE " to choose mode (mode can be changed under running).
•
System resets and restarts in the new mode.
•
Image 15 – Setting the operation mode
Checking current temperatures (Image 16):
Under running press "
•
ambient / heater / water outlet temperature.
Image 16 – Checking temperatures

Setting the time:

Press "CLOCK" to set the time. The time displayed blinks, press "CLOCK" button again and use "
•
and " buttons to change the hour setting. To change the minutes, press "CLOCK" button again.
Use " " and "
button again to save changes. The display returns to normal state in 8 seconds.
Timer switch ON and Timer switch OFF:
Once the time has been set correctly, this function allows the device start and stop time to be
•
programmed. This is meant only for filtering.
Press "TIMER ON" button to set the start time. Display blinks "ON", press "TIMER ON" button again
•
and use " " and "
button again. Use "
"TIMER ON" button to save the changes. The display returns to normal state in 8 seconds.
Press "TIMER OFF" button to set the stop time. Display blinks "OFF", press "TIMER OFF" and use
•
" " and " buttons to change hour settings. To change the minutes, press "TIMER OFF" button
again. Use " " and "
OFF" button to save the changes. The display returns to normal state in 8 seconds.
The time setting is from 0 to 24 hours cycle.
•
If you set timer ON and OFF times to be the same, the timer is not in use.
•
While setting the timer, press "CLOCK" to deactive the timer.
•
Key lock:
Tubtainer 2 heater/filter system
" or " " to check the current status of the unit. You can check water inlet /
buttons to change the minute setting. Once the correct time is set, press "CLOCK"
buttons to change hour settings. To change the minutes, press "TIMER ON"
" and " buttons to change the minutes. Once the correct time is set, press
buttons to change the minutes. Once the correct time is set, press "TIMER
22.12.2020
48/108
"
P 12/17
AGE