Emergency Key Override; Terms You Should Know; Restore Keypad Factory Settings - Schlage FE575 Guide D'utilisation

Emergency Key Override

Emergency Key Override can be used when the battery is completely dead, or when no valid User Code is known.
1. Insert key.
* Rotate the key back to starting position to relock. The key cannot be removed from the cylinder while the lock is unlocked. See Replacing
the Keypad Batteries on page 8.

Terms You Should Know

User Code
Any combination of four (4) digits entered into the keypad to unlock the lock. These four digits must be different
from the first four digits of the Programming Code. Two User Codes are programmed into the lock by default. These
two codes can be found on the yellow stickers, one on the back of the keypad assembly and one on the Keypad
Locks Programming Guide.
Programming Code
Any combination of six (6) digits entered into the keypad to put the lock in programming mode. The first four digits
must be different from all of the User Codes currently in the lock. One Programming Code is programmed into the
lock by default. This code can be found on the yellow stickers, one on the back of the keypad assembly and one on
the Keypad Locks Programming Guide.
Vacation Mode
When enabled, no User Codes will unlock the lock. This feature prevents unauthorized access attempts when the
property is unattended for a long period of time. See the Keypad Locks Programming Guide for more information.

Restore Keypad Factory Settings

Locate the default programming and User Codes on the front of the Keypad Locks Programming Guide or the back of
the keypad before beginning! Default programming and User Codes will be restored. All existing User Codes and current
Programming Code will be erased. CUSTOMER SERVICE CANNOT RETRIEVE LOST DEFAULT CODES! DO NOT
RESTORE FACTORY SETTINGS UNLESS YOU CAN LOCATE THE DEFAULT CODES.
1. Disconnect the battery. See Replacing the Keypad Batteries on page 8.
2. Press and release
3. Reconnect the battery and wait until
4. Within 10 seconds, press and hold
2. Rotate key 270° to unlock.
.
is no longer lit (about one second).
until
WARNING
lights green and the lock beeps.
3. Rotate knob/lever to open
door.*
5