Prophete 2926 Notice D'utilisation page 73

INSTALLATION OF THE CONNECTION BETWEEN THE TRAILER
AND THE BIKE AT THE AXLE
•
Screw the towbar to the middle hole of the towbar holder with its rear hole.
Put the towbar in the movement position and insert and attach the safety pin
through the front holes.
•
Unlock the front coupling part by pulling out the safety pin and attach it to the
left side of the rear wheel axle. Before starting your ride, connect the coupling
part of the tow bar to that of the bike and secure it with the safety pin. Guide
the safety belt around the strut of the rear wheel and attach it to the safety
eyelet of the towbar.
BDA2926.indb 73
GB
73
08.05.2014 11:00:30