Luminance Brands Kathy Ireland Home CURVA SKY LED OUTDOOR Mode D'emploi page 18

8.8: Storage Bracket Installation
A Storage Bracket is provided for holding your Remote
Control when not in use . If you desire to use the
Bracket, install it on a wall that is away from excess
heat or humidity .
Slide the Wall Bracket Cover up to expose the Screw
Holes for installation (Figure 30) .
Position the Bracket on the wall in desired location .
Install the Two Screws (supplied) into the Wall Bracket
and tighten to secure to Wall .
Slide the Wall Bracket Cover back down over the
Screws .
COVER
STORAGE
BRACKET
HOLES (2)
SCREWS (2)
Figure 30
18
U.L. Model No.: CF144L & CF152L