Luminance Brands Kathy Ireland Home CURVA SKY LED OUTDOOR Mode D'emploi page 17

8.4
Your Remote Control has full control of your Ceiling
Fan and Light .
When power is restored, push and hold the FAN
POWER OFF Button (
the Code in the Receiver (Figure 26) .
NOTE: The Ceiling Fan Lights (if installed) will Blink
to indicate the Transmitter has been paired with the
Receiver.
To turn the Ceiling Fan OFF: Press and release the
FAN POWER OFF ( ) Button (Figure 26) .
8.5
To turn the Fan ON and to Increase the Fan Speed:
Press the ( ) Button once for each of the 6 Speeds .
To turn the Fan ON and to Decrease the Fan Speed:
Press the ( ) Button once for each of the 6 Speeds .
The LED Display will light up to indicate the New Speed
selected .(Figure 27) .
NOTE: If the fan is OFF, the first time the (
( ) button is pressed, it will turn the fan ON at
the speed previously selected.
8.6
To turn the Downlight ON/OFF: Press and release
the ( ) Button . The Light will turn ON at the Light
Intensity previously selected . To change the Intensity,
hold the Button down . The Intensity will go up and
down while the Button is held . Release the Button at
the desired Intensity (Figure 28) .
) for 3 to 5 Seconds to set
) or
POWER INDICATOR
LIGHT
FAN POWER OFF
BUTTON
Figure 26
POWER INDICATOR
LIGHT
FAN SPEED BUTTONS
Figure 27
POWER INDICATOR
LIGHT
LIGHT INTENSITY
BUTTON
Figure 28
Please contact 1-800-777-4440 for further assistance
17
luminancebrands.com
U.L. Model No.: CF144L & CF152L