Using The Programmer - Brandt CAF1318E Manuel D'instruction

 Open the lid and fill the water tank with cool or cold water up to the level corresponding to
the number of cups of coffee desired. Do not exceed the maximum level of the tank.
 Place a filter paper in the basket provided for this.
 Place ground coffee in the paper filter using a spoon and close the lid of the filter holder.
 We suggest using a level tablespoon of ground coffee for each cup of coffee. After using
the coffee maker several times, you can adjust the quantity of coffee to your taste.
 Close the lid of the tank.
 Place the coffee pot with its lid in place on the heating plate. The coffee pot will open the
anti-drip valve when it is correctly placed on the plate. Otherwise the filter coffee will not
pass into the coffee pot and could overflow from the filter.
 Plug the machine into the mains and turn on the coffee maker by pressing the Start/Stop
button (if you want to use the programmer doe not press the Start/Stop button)
 The water will start being filtered through the coffee maker, pouring coffee into the pot.
When the coffee is ready the heating plate will keep the coffee hot for 40 minutes. Turn off
the coffee maker by pressing the switch if you do not want to keep the coffee hot.
 After 40 minutes, the coffee maker will turn off automatically to save energy.
 Unplug the coffee maker
The coffee maker is fitted with an anti-drip system. This prevents the coffee from
dripping onto the plate when the pot is not correctly in place or when it is removed from
the machine.
b) Using the Programmer

Open the lid and fill the water tank with cool or cold water up to the level corresponding to
the number of cups of coffee desired. Do not exceed the maximum level of the tank.

Place a filter paper in the basket provided for this.
 Place ground coffee in the paper filter using a spoon and close the lid of the filter holder.
 We suggest using a level tablespoon of ground coffee for each cup of coffee. After using
the coffee maker several times, you can adjust the quantity of coffee to your taste.
 Close the lid of the tank.
 Place the coffee pot with its lid in place on the heating plate. The coffee pot will open the
anti-drip valve when it is correctly placed on the plate. Otherwise the filter coffee will not
pass into the coffee pot and could overflow from the filter.
 Plug the machine into the mains. (do not press the Start/Stop button)
 Enter the time at which you want the coffee maker to start (refer to the paragraph
concerning using for the first time).
 A green light will come on indicating that the machine has accepted the request.
 If you want to cancel the programming, press the "Prog" button once. The green light will
go out indicating that the machine has accepted the request.
20