Controlling The Ptz Camera With An Nvr; Controlling A Ptz Camera (Local Nvr) - Lorex LNZ32P4 Série Manuel D'instructions

5
Controlling the PTZ Camera with
an NVR
The camera can accept PTZ commands directly through the Ethernet cable. There is no
need to run special wiring to control the movement of the PTZ camera.
NOTE
• The following instructions are based on the Lorex LNR400 Series NVR. See your NVR's instruction
manual for instructions on controlling the PTZ camera with your system.
• For the latest list of compatible NVRs, please visit
To connect a PTZ camera to the system:
1. Connect the camera to your NVR as detailed in 3 Connecting the Camera.
2. Right-click and click Main Menu. Enter the system user name (default: admin) and
password (default: 000000) if prompted.
3. Click >SETTING>PAN/TILT/ZOOM.
4. Under Channel, select the channel your PTZ camera is connected to.
5. Under PTZ Type, select Remote.
6. Click OK. You can now control your PTZ camera using the system.

5.1 Controlling a PTZ Camera (Local NVR)

1. In Live View, double-click the channel that has the PTZ camera connected to open in
full-screen.
2. Right-click and click PTZ. Enter the system user name and password if prompted. The
PTZ menu opens.
3. Use the on-screen controls to control the camera.
#LX400075; r.34407/34407; en-US
www.lorextechnology.com/support.
13