Weller WSD 151 Mode D'emploi page 16

6-10
4.1 Technical data WSD 151 / PUD 151R
Dimensions
Weight
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature control
Temperature accuracy
Temperature stability
Potential-free contact
Equipotential bonding
Standby temperature
setting
Equipotential bonding
4 variants are possible by connecting the 3.5 mm pawl socket (6)
differently:
− Hard earthed/grounded: without connector (delivery status)
− Equipotential bonding: with connector, bonding line at central
contact
− Floating: with connector
− Soft-grounded: with connector and soldered resistance.
Grounding via set resistance value.
WSD 151 / PUD 151R
L x W x H (mm): 166 x 115 x 101
L x W x H (inch): 6.54 x 4.53 x 3.98
3.335 kg
230 V, 50 Hz
230 V / 120 V (50 / 60 Hz)
(PUD 151R)
150 W
I (control unit) and III (soldering iron),
antistatic housing
T500 mA (100 V: T1, 25 A)
Soldering and unsoldering bit
stepless 50 °C – 550 °C
(150 °F – 999 °F).
Controllable temperature range is
tool-dependent
± 9°C (450°C)
± 11°C (550°C)
± 5 °C (± 10 °F)
PUD 151R optocoupler (transistor
output) max. 24 V / 20 mA;
pin 1 (+), pin 2 (-)
Via 3.5 mm pawl socket on back of
device
150 °C / 302 °F