Dtect150_1609929X08_3-15.qxp_D-tect150 3/20/15 10:53 AM Page 8
Optimal operation of the detection tool is possible only when the operating instructions and information
are read completely, and the instructions contained therein are strictly followed.
INTENDED USE
The detection tool is intended for the detection of
metals (ferrous and non-ferrous metals, such as
pipes, metal studs and rebar), wood studs, plastic
pipes (>1" in diameter) and joists, and "live"
wires/conductors in walls, ceilings and floors.
PRODUCT FEATURES
The numbering of the product features shown
refers to the illustration of the detection tool on the
graphic page.
1 Marking guide, top
2 Wheel
3 Marking guide, left and right
4 Battery lid
5 Latch of battery lid
6 Handle
7 Maintenance cover
8 Serial number
9 Sensor area
10 Selection button, right
11 Start button
12 Selection button, left
13 Audio signal button
14 Setup button
15 On/Off button
16 Display
17 LED
18 Protective soft case
The accessories illustrated or described are not
included as standard delivery.
Functional Description
Start
Setup
-8-
DISPLAY ELEMENTS
a Audio signal indicator
b Battery indicator
c Sensor-range indicator
d Area already detected
e Measuring scale for object depth
f
Area not yet detected
g Outer edges, to be marked left and right via
marking guide 3
h Mode indicator
i
Gray: Found object outside of the
sensor range
j
Black: Found object within the sensor range
k Center line, corresponds with the marking
guide
l
Object depth indicator
1
m Object material indicator
n "Live" wire indicator