Maintenance And Troubleshooting; Setting/Replacing Paper Rolls - Citizen CT-S281 Mode D'emploi

4. MAINTENANCE AND TROUBLESHOOTING

4.1 Setting/Replacing Paper Rolls

1. Press the cover open button down.
2. Open the printer cover.
3. Insert a paper roll with is print area facing down as shown in the figure and
pull out the paper end straight forward by several cm out of the printer.
4. Close the printer cover until a click can be heard.
WARNING
● When opening the printer cover, take care not to touch the print head or cutter blade.
Otherwise, burning or injury of hand may result.
CAUTION!
● Always use the specified types of paper roll.
● Confirm that the paper roll is set correctly.
● When the paper is skewed and not extended straightforward from under the cover,
open the cover and adjust the paper correctly.
● When closing the cover, press on the both front sides marked or the center of the cover
to close it firmly.
● When setting paper, pay attention not to let your fingers get injured by the edge of
paper.
● When setting a label paper roll to the printer, be sure that there is no uneven portion
on the roll paper side. If the roll paper side is uneven, set it evenly.
Cover open button
— 25 —