AMIX AFF 2 Série Manuel Utilisateur page 38

WEB INTERFACE
- A or C weighting selection for all Leq
and Fast displays.
- C weighting for peak display.
Offset value to adjust the sensor
level, to match the " audience "
level. When offset differs from
0, a display is available on AFF
front panel.
Display luminosity setting in
manual mode.
Do not forget to save !
ENGLISH
Attention : using AFF05 display, stick
the box, otherwise the AFF05 display
will be wrong.
Do not forget to save at the end.
38
Give a name to the site ans
his location. These names
will be used within the "Leq
Visualisation graph"
Select a switching threshold
and a Leq. These values will
switch opto-mos1. The same
applies to opto-mos 2.
Stick "Blink AFF" box: the
main display on AFF series-2
will blink when Leq will excess
GPO1 threshold.
Central display Leq choice : Fast,
1mn, 5mn, 10mn, 30 mn, 60mn
or disable display .
Bottom left display Leq choice :
Fast, Leq1mn, 5mn, 10mn, 30
mn, 60mn or disable display .
Choice to display the peak level
on the bottom right display or to
disable it.
Display luminosity setting in
automatic mode:
- "Indoor" min luminosity.
- "Outdoor" max luminosity.
Setting parameters for fullscreen.
AMIX - AFFseries-2
Next