Technical Information - DEFA MultiCharger Mode D'emploi

Masquer les pouces Voir aussi pour MultiCharger:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The charge output is protected against short circuiting and wrong connections.
The charger does not draw current from the battery when the main power is not connected.
Do not install the charger in a highly flammable environment.
Do not charge a damaged battery.
During charging, battery gas which is very explosive can be developed. Take care not to have sparks, open flames,
cigarettes or similar in the vicinity of the battery.
The acid in the battery is corrosive and harmful. It damages clothes, metal and varnish. In case of spillage and
contact with skin, wash and rinse thoroughly with water and consult a doctor.
Lead and other chemicals that are used in batteries are toxic. Wash skin and hands thoroughly after working
with batteries.
The charger is maintenance free. All batteries should be inspected monthly as a minimum to achieve the best
possible safety. The charging process is in such way that the batteries remain fully charged without further water
consumption than normal evaporation.
The guarantee applies to faults in production and materials for 2 years from date of purchase. The customer must
deliver the product back to the place of purchase together with the receipt. The guarantee shall cease to apply if the
charger is handled negligently, opened or repaired by someone other than DEFA or an authorized representative of
DEFA. DEFA has no other guarantee than this and will not be responsible for other costs than those referred to, i.e.
no possible additional costs. Neither is DEFA bound by any other guarantee.
Model
Item no.:
Mains Voltage [VAC]
Temperature Range [ºC]
Charging Voltage* S1 [VDC]
Maintenance S2 [VDC]
Current [A]
Battery Size Max. [Ah]
IP rating [IP]
Weight [kg]
Measure (H/W/D) [mm]
Acceptance
* Temperature-compensated approx 5,0 mV/
DEFA confirms that these chargers satisfy relevant safety requirements according to prevailing regulations and standards.
SAFETY
MAINTENANCE
WARRANTY

TECHNICAL INFORMATION

1x20A
705800/706000/706200
20
300
1,5
183x98x53
EN60335-1, EN60335-2-29, EN55014-1, EN55014-2, EN61003-3/2
C/cell. Ref. 25
C.
o
o
2x20A
705900/706100/706300
230
-35 +50
14,4
13,5
2x20
2x300
44
3
183x190x53
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

MarinechargerRescuecharger1x20a2x20a

Table des Matières