Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Spacer
Spacer
４N・ｍ
32mm
Bolts
［M6×32］
Enlarged
View
Body
Cushion base
Spacer
Cushion base
Cover
Cushion base
Cover
Hex Wrench
Bolts
［M6×32］
Base
bracket
Base bracket
Placing the cushion bases
Insert the spacer into the cushion base
installation hole. Align the hole with the
nut of the vehicle, and place it over the
cover on the installation location.
Attaching the base brackets
Place the base bracket on the
cushion base. Secure them with the
long bolt [M6x32] (included) using the
Hex wrench (included) until the bolts
are firmly tightened while holding both
together parallel to the roof molding.
●All base brackets (4 pcs.) are identical. The bracket is
symmetrical with respect to the side-to-side axis; its
installation orientation does not matter.
EN-6
Installing System Carrier
EN-5
-EN
4182808TR1455
-A
Publicité
Table des Matières
