Maintenance; Draining The Air Tank - Maximum 058-9318-6 Mode D'emploi

GENERAL MAINTENANCE
Regular and periodic maintenance of the compressor ensures trouble-free operation.
The compressor components should be inspected on a regular basis.
DESCRIPTION
Drain moisture
Check proper operation
Check air leaks, abnormal
noise, or vibration

DRAINING THE AIR TANK

1. Turn OFF the power supply to the pump. Release air pressure in tank by pulling the
relief valve ring.
2. Turn the drain valve counter-clockwise to open it and tilt the tank to drain out water
completely.
3. Close the drain valve.
NOTE:
During cold temperatures, drain the air tank after each use to
reduce freezing problems.
WARNING!
• Potential hazard that could result in serious injury or loss of life.
• To avoid personal injury, always shut off and unplug the
compressor from the power supply outlet and relieve all air
pressure from the air supply system before performing any
service on the air compressor.
• Do not use damaged tool. If abnormal noise or vibration occurs,
rectify the problem before use.
200-2952-B_ALA1983012 MAXIMUM MANUAL_VR_120616.indd 19
COMPONENTS
Air tank
Pressure relief valve, air filter
Worn or broken parts
MAXIMUM SERVICE INTERVAL
Daily Weekly Monthly
X
X X
X
19
TM
X
1/24/2017 8:28:22 AM