Before Assembly - Maximum 058-9318-6 Mode D'emploi

14
model no. 058-9318-6 | contact us 1-888-670-6682

BEFORE ASSEMBLY

• Unpack the carton and remove the compressor. Make sure all parts are present.
Inspect the unit for damage.
• If any part is missing or damaged, do not attempt to assemble the product.
Contact customer service for replacement parts.
• Claim for replacement parts immediately as there is time limitation.
• Check the compressor's serial label to ensure that the correct model has been
received, and that it has the required pressure rating (125/155 PSI)
for its intended use.
ASSEMBLY
1. Place the compressor (1) on the floor
or a hard, level surface in a clean,
well-ventilated area to ensure suffi-
cient air flow and cooling. Make sure
the compressor is placed at least 12"
(30 cm) from any wall or obstruction
(FIG. A).
2. Locate the compressor near a
grounded electrical outlet (2)
(FIG. B).
CAUTION!
• Potential hazard that may result in moderate injury or
damage to equipment.
• Do not use compressor in areas containing dust particles
to avoid damage to the motor.
200-2952-B_ALA1983012 MAXIMUM MANUAL_VR_120616.indd 14
1
1
12"(30 cm)
1
FIG. A
2
FIG. B
1/24/2017 8:28:17 AM