Moulinex LM 207 Manuel D'utilisation page 21

CLEANING
• Handle blades with great care as they are extremely sharp and can cause injury.
• Unplug the blender.
• Remove the jug and rinse it with its lid under running water.
• Wash the accessories in hot water with a few drops of washing up liquid added or in the
dishwasher.
• Clean the body of the blender (A) with a moist cloth. Dry carefully.
• Never put it in water or under running water.
• To facilitate maintenance of the jug (c4), unlock the blade holder (c2) and remove its seal
(c3) before cleaning the assembly.
• To clean the pouring lid (c5) more effectively, you can separate its two component parts by
turning the lid to position
• You can wash the blender jug and accessories in the dishwasher.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEM
Product does not
work.
Excessive vibra-
tion.
Leak from lid.
Blade does not
turn easily.
Leak from bottom
of jug.
(Fig. 6).
CAUSE
The plug is not connected.
The jug or accessory is not
fitted correctly on the body
of the blender.
The product is not placed
on a flat surface.
The jug or accessory is not
correctly fitted to the body
of the appliance.
Too great a volume of
ingredients.
Holes of the lid are
positioned opposite the
pouring spout.
The lid is not correctly
positioned.
Pieces of food too big or
too hard.
Seal is not positioned or
locking nut is not screwed
in correctly.
Plug in the appliance to a
socket with the same
voltage.
Check that the jug or
accessories are resting
correctly on the motor unit.
Place the product on a flat
surface.
Check for correct
positioning of the jug or
accessory.
Reduce the quantity of
ingredients processed.
The lid is not correctly
positioned.
Set the pouring lid to the
closed position.
Lock the lid onto the
blender jug correctly.
Reduce size of pieces of
food or quantity.
Add liquid.
Re-position the seal and
screw the nut in firmly.
16
SOLUTION