Charging Battery Pack - Tennant V-BP-6B Manuel D'utilisation

English
EN

CHARGING BATTERY PACK

The Lithium-Ion battery does not have a memory and
does not have to be fully depleted before it can be
charged again. Charging at any time during the run
cycle will not affect the battery performance or life.
1. Plug the charger's power cord into the battery pack.
NOTE: If charging battery pack in machine, power to
machine is shut off.
2. Plug the charger's power cord into a properly
grounded wall outlet.
WARNING: To reduce the risk of fire, explosion,
electric shock, or injury. When charging, make sure that
the charger has at least 6 inches of clearance on all
sides. Adequate airflow is required to cool the charger
when in use.
8
3. The indicator light should turn Red and blink while
charging and turn Green when fully charged. The
battery pack may require approximately 2.5 hours to
fully charge. Charger will automatically shut off after
the charge cycle is complete.
4. Verify the charge level of the battery pack by
pressing the power level indicator button on the
front of the battery pack. Four lights (one red and
three green) indicate a fully charged battery. Unplug
charger cord from battery pack and then unplug
power cord from wall outlet after charging.
NOTE: Battery pack may get warm while charging. This
is normal.
WARNING: To reduce the risk of fire, explosion,
electric shock, or injury. Use only Tennant Charger
1237438 and Tennant battery pack 1237440. Do not
use a battery pack that has been damaged in any way.
Tennant V-BP-6B, (01-2018)