Description Of Symbols - Silverline 268317 Manuel D'utilisation

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective shoes
Wear protective clothing
Caution!
Risk of explosion!
Lead acid battery!
Always disconnect from the power supply when adjusting,
changing accessories, cleaning, carrying out maintenance and
when not in use!
Toxic fumes or gases!
NO open flames!
NO smoking!
DO NOT use in rain or damp environments!
Risk of fire!
Indoors use only!
Class I construction (protective earth)
Conforms to relevant legislation and safety standards.
Environmental Protection Waste electrical products should
not be disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for
recycling advice.
4
Original Instructions
Technical Abbreviations Key
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
A
Amp hours (battery capacity)
h
Hz Hertz
, DC Direct current
W, kW Watt, kilowatt
Ω
Ohms (resistance)
Specification
Input voltage: .........................................................................................230V~ 50Hz
Input current: ............................................................................... 160W (230W max)
Output Power 12V: .............................Effective 11.5A (RMS), average 7A (EN60335)
Output Power 12V (boost): ...................Effective 15A (RMS), average 9A (EN60335)
Output Power 24V: ...............................Effective 6A (RMS), average 3.5A (EN60335)
Output Power 24V (boost): .................... Effective 8A (RMS), average 5A (EN 60335)
Battery Capacity Range: ......................................................... 25 – 135Ah (12 & 24V)
Battery Cell Type: ........................................................................... Standard (wet cell)
DC Circuit Protection: ...............................................................................DC 15A fuse
AC Circuit Protection: .....................................................................1 x F 250V 2A fuse
Thermal Protection: ......................................................Self-resetting thermal cut out
Protection Class: ..................................................................................................
Ingress Protection: ...............................................................................................IP20
Charging cable length: ................................................................................ 1.5m x 2
Power cable length: ...............................................................................................2m
Dimensions (L x W x H): .............................................................190 x 160 x 250mm
Product Weight: ................................................................................................. 4.8kg
As part of our ongoing product development,
specifications of Silverline products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long-term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool,
may produce increased levels of noise and vibration. www.osha.europa.eu
provides information on sound and vibration levels in the workplace that may be
useful to domestic users who use tools for long periods of time.