Setting Up For Hands-Free Phoning; Making A Phone Call; Taking A Phone Call - Pioneer DEH-P6100BT Mode D'emploi

Using Bluetooth wireless technology
! Advanced operations that require your atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place.
! Depending on the cellular phone connected
to this unit, the operations available with this
unit may be limited.

Setting up for hands-free phoning

Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, pairing your phone with
this unit, adjusting the volume level and ad-
justing the microphone angle.
1 Connecting and pairing
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, see following section. Connecting a
Bluetooth device on page 27.
2 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is recorded in this unit as the default set-
ting.
# Caller's voice volume and ring volume may
vary depending on the type of cellular phone.
# If the difference between the ring volume and
caller's voice volume is big, overall volume level
may become unstable.
# Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
3 Microphone angle adjustment
The microphone needs to be pointed toward
the person speaking.

Making a phone call

Dial a number
The most basic way to make a call is to simply
dial the number.
For detailed instructions, refer to Making a call
by entering phone number on page 37.
Calling a number in the Phone Book
or the Call History
For detailed instructions, refer to Calling a
number in the phone book on the next page
and Using the missed, received and dialed call
lists on page 35.
Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
1 Press BAND/ESC and hold until CANCEL
appears in the display.
When VOICE DIAL ON is displayed, voice re-
cognition function is ready.
# If your cellular phone does not feature voice
recognition function, NO VOICE DIAL appears in
the display and operation is not possible.
2 Pronounce the name of your contact.

Taking a phone call

Answering or rejecting an incoming call
% Answering an incoming call
When a call comes in, press
MULTI-CONTROL.
% End a call
Press PHONE/ /BT MENU.
Section
08
33
En