Using Cd Text Functions; Selecting A Track Directly; Introduction To Advanced Operations - Pioneer DEH-P6100BT Mode D'emploi

Section
12 Available accessories
Notes
! When multi-CD player completes preparatory
operations, READY is displayed.
! If an error message is displayed, refer to the
multi-CD player owner's manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.

Using CD TEXT functions

You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the built-
in CD player.
Refer to Displaying text information on disc on
page 17.

Selecting a track directly

The operation is the same as that of the built-
in CD player.
Refer to Selecting a track directly on page 18.
Introduction to advanced
operations
You can only use COMP/DBE (compression
and DBE) with a multi-CD player that supports
them.
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
The function menu is displayed.
3 Turn MULTI-CONTROL to select the
function.
REPEAT (repeat play)—RANDOM (random
play)—SCAN (scan play)—PAUSE (pause)—
COMP/DBE (compression and DBE)—ITS-P
(ITS play)—ITS-M (ITS programming)—
TITLE INPUT (disc title input)
54
En
# If you do not operate functions other than
ITS-M and TITLE INPUT within about 30 seconds,
the display automatically returns to the ordinary
display.
# When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot switch to
TITLE INPUT. The disc title is already recorded on
the CD TEXT disc.
Function and operation
REPEAT, RANDOM, SCAN, PAUSE and
TITLE INPUT operations are basically the
same as that of the built-in CD player.
Function name Operation
Refer to Selecting a repeat play
range on page 19.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-CD
REPEAT
player are:
! MCD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
Refer to Playing tracks in random
RANDOM
order on page 19.
Refer to Scanning folders and
SCAN
tracks on page 19.
Refer to Pausing playback on page
PAUSE
20.
Refer to Entering disc titles on
TITLE INPUT
page 20.
Notes
! To return to the playback display, press
BAND/ESC.
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.