Section
05
Built-in CD Player
Pausing playback
1
Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2
Use MULTI-CONTROL to select PAUSE in
the function menu.
3
Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
# To turn pause off, press MULTI-CONTROL
again.
Using advanced sound
retriever
Advanced sound retriever function automati-
cally enhances compressed audio and re-
stores rich sound.
% Press S.Rtrv/SAT MODE repeatedly to
select the desired setting.
OFF (off)—1—2
# 2 is more effective than 1.
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
Entering disc titles
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
1
Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2
Play the CD that you want to enter a
title for.
3
Use MULTI-CONTROL to select
TITLE INPUT in the function menu.
20
En
4
Press DISP/SCRL to select the desired
character type.
Press DISP/SCRL repeatedly to switch between
the following character types:
Alphabet—Numbers
5
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
6
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
7
Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push MULTI-CONTROL right one
more time, the entered title is stored in mem-
ory.
8
Press BAND/ESC to return to the play-
back display.
Notes
! Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
the disc is reinserted.
! After data for 48 discs are stored in the mem-
ory, data for a new disc overwrites the oldest
one.
! If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
! When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.