Setting The High Pass Filter For Front Speakers; Setting The High Pass Filter For Rear Speakers - Pioneer DEH-P9600MP Mode D'emploi

Audio Adjustments
2 Press and hold b to mute the selected
speaker unit (filter).
MUTE blinks in the display.
# To cancel the muting, press a.
Setting the high pass filter for
front speakers
1 Press AUDIO and hold until second
audio menu appears in the display, then
press AUDIO to select HP F1.
After second audio menu is displayed, press
AUDIO until HP F1 appears in the display.
2 Press c or d to select slope.
Each press of c or d selects slopes in the fol-
lowing order:
12 6Pass (0) (dB/oct.)
# If you set the slope to 0 dB/oct. (Pass), the
audio signal bypasses the filter, so the filter does
not have an effect.
3 Press AUDIO to select HP F2.
Press AUDIO until HP F2 appears in the dis-
play.
4 Press c or d to select cut-off frequency.
Each press of c or d selects cut-off frequen-
cies in the following order:
506380100125160200 (Hz)
Only frequencies higher than those in the se-
lected range are output from the front speak-
ers.
5 Press a or b to adjust the output level
of the front speakers.
Each press of a or b increases or decreases
the level of the front speakers. ±0  24 is dis-
played as the level is increased or decreased.
Setting the high pass filter for
rear speakers
1 Press AUDIO and hold until second
audio menu appears in the display, then
press AUDIO to select HP R1.
After second audio menu is displayed, press
AUDIO until HP R1 appears in the display.
2 Press c or d to select slope.
Each press of c or d selects slopes in the fol-
lowing order:
12 6Pass (0) (dB/oct.)
# If you set the slope to 0 dB/oct. (Pass), the
audio signal bypasses the filter, so the filter does
not have an effect.
3 Press AUDIO to select HP R2.
Press AUDIO until HP R2 appears in the dis-
play.
4 Press c or d to select cut-off frequency.
Each press of c or d selects cut-off frequen-
cies in the following order:
506380100125160200 (Hz)
Only frequencies higher than those in the se-
lected range are output from the rear speak-
ers.
5 Press a or b to adjust the output level
of the rear speakers.
Each press of a or b increases or decreases
the level of the rear speakers. ±0  24 is dis-
played as the level is increased or
decreased.
Section
08
43
En