Salta 581 Manuel D'utilisation page 5

3. ASSEMBLY
Step 1:
Using the Spacer take Screw, Flat Washer ,Nylon Lock Nut & Dome Nut and connect to the
frame as shown in diagram, In order repeat this all.
Ensure all nuts and bolts are securely tightened .
Step 2:
1
Insert the Upper Steel Tubes (2) into the sleeves
of the enclosure net (5) as shown
Note: Ensure end of steel tube is visible as shown.
Locate Upper Steel Tube (2) over Lower Steel
Tube (1).
Repeat for all poles.
GB
1
2