Waeco PerfectView M59L Instructions De Montage Et De Service page 52

_M59L_EB_10s.book Seite 52 Dienstag, 22. Januar 2008 4:59 16
Using the LCD monitor
Setting picture parameters
➤ Call up the "PICTURE/BILD" menu.
✓ The following menu is shown:
PICTURE
CONTRAST
BRIGHTNESS
COLOR
(TINT
VOLUME
You can open the following five functions:
CONTRAST: sets the contrast
BRIGHTNESS: sets the brightness
COLOUR: sets the colour
TINT: sets the colour density
This symbol is not displayed when the PAL video signal is set.
VOLUME: sets the volume
➤ Select the desired function (e. g. color) by pressing the "SELECT" button
the appropriate number of times.
✓ The function selected and the value currently set are displayed at the
bottom of the display.
➤ Press the "UP" button to increase the value or ...
➤ ... press the "DOWN" button to decrease it.
52
50
50
50
50)
20
PerfectView