Stand-Alone Mode - HQ Power VDL1803MHRGB Mode D'emploi

Menu item
TC switch
mask
TC switch
TC switch
temp
Reverse
pan
Reverse
tilt
Scan setting Pan
degree
Scan
blackout
Feedback
Square law
Dimmer curve Inverse square law
Dimmer speed Smooth / Fast
DMX reset Enabled / Disabled
Fan Regulated / Full
Time: hh/mm/ss
Information Date: mm/dd/yy
Use time
7.3

Stand-Alone Mode

In stand-alone mode, the device runs one of the built-in programs: automatic or sound-activated. You have the
following options:
Display Description
Custom program. See Macro Programming
Macro
for more information.
Built-in program: changing colours, with
Fade
fade effect
Built-in program: changing colours, with
Twinkling
strobe effect
Built-in program: changing colours, no
ChangeColor
effects
10000K
8500K
... Various built-in, fixed colours
Green
Red
V. 01 – 26/10/2012
VDPL1803MHRGB
Setting Description
Select OFF to enable the temperature control switch (default setting).
ON/OFF
Always use the OFF setting.
Password protected. Do not change these settings.
Select ON to inverse the panning direction on this device.
ON/OFF
Select OFF to keep the normal panning direction on this device (default
setting).
Select ON to inverse the tilting direction on this device.
ON/OFF
Select OFF to keep the normal tilting direction on this device (default
setting).
630/540 Select the maximum pan range: 630° or 540° (default setting).
Select ON to enable blackout during panning/tilting.
ON/OFF
Select OFF to disable blackout during panning/tilting (default setting).
Select ON to enable the pan/tilt auto-correction system (default
setting).
ON/OFF
Select OFF to disable the pan/tilt auto-correction system (for servicing).
Square law dimming curve
Inverse square law dimming curve
S-curve
S-curve dimming curve
Select Smooth for smooth but slower dimming (default setting).
Select Fast for fast dimming.
Select Enable to enable resetting the device via DMX (default setting).
Select Disable to disable resetting the device via DMX.
Select Regulated to let the thermostat define the speed of the cooling
fan (default setting).
Select Full to let the fan work continuously at maximum speed.
Shows the software creation time.
Shows the software creation date.
Shows the time (in hours) the lights have been operational.
(default setting).
Sound-activation
possible
yes
yes
yes
yes
no
6
Pan/tilt movement
possible
yes
yes
yes
yes
no movement, stationary
default pan/tilt position
©Velleman nv