Top Hopper-Front Cut; Top Hopper-Back Chute; Material Push Stick - KPC BK 500 S Mode D'emploi

9.5

Top Hopper-front cut

9.6

Top hopper-back chute

9.7

Material Push stick

The large sloping front chute of the Top Hopper
is designed to accept leaves and small garden
clippings. Shredding and mulching is achieved by
natural suction of the debris through the blade
chamber.
Do not overfeed and do not feed wet, soggy
material into the shredder as this may clog the
blade chamber and the discharge chute.
The smaller back chute of the top hopper accepts
medium to larger size garden clippings.
Shredding and mulching is achieved through the
same action as the front chute. If a finer type
mulch is required, re-feed the mulch through
again until the desired result is obtained.
User supplied push stick to push remaining
material into hopper opening. DO NOT USE
HANDS.
P a g e | 12
EN