Settings; The Initial Settings Procedure - Samsung HT-E5500 Mode D'emploi

Settings

The Initial Settings Procedure

• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
Initial Settings > On-Screen Language
Select a language for the on-screen
displays.
▲
Dansk Nederlands
English Eesti keel
Suomi Français
Deutsch Ελληνικά
Hausa Magyar
Asusu Igbo Italiano
▼
2 . Use the ▲▼◄► buttons on the remote
to select the desired language, and then
press the E button twice. The Start screen
appears.
3 . Press the E button to start setup. The
Network Settings screen appears.
Initial Settings > Network Settings (1/5)
The next step is to set up a wireless network using an
internal LAN Adapter.
If you want to connect to your wired network, plug in a
network cable.
4 . Press the E button to set up the product's
wireless network connection or select
Skip, and then press the E button to skip
network setup. If you selected Skip, go to
Step 12.
24
|
English
HT-E5500_XU_0223.indd 24 HT-E5500_XU_0223.indd 24
|
\ The product starts the wireless network connection
\ If you skip wireless network setup here, go to "Wireless
5 . The product searches for and then displays
Select English as the
on-screen menu
language.
Next
6 . Use the ▲▼ buttons to select a router, and
7 . Press the E button to continue. The
|
\ If you have a WPS(PBC) compatible router, select
Previous
Next
Skip
8 . Enter your network's security key. When
NOTE |
procedure by default. If you want to set up a wired
connection, select Skip, and then go to "Configuring
Your Network Connection" on page 32 after you have
completed the Initial Settings Procedure.
Network" on page 33 to set up the product's wireless
network connection later.
all available wireless router network
connections.
Initial Settings > Network Settings (2/5)
Select your wireless router from the list.
KIMING_VTOWER
TIAS
si-ap
surlwang5
Add Network
then press the E button. The Next button
is highlighted.
Security Key screen appears.
NOTE |
WPS(PBC) instead, press the E button, and then follow
the directions on the screen. When done, go to Step 10.
Initial Settings > Network Settings (4/5)
Enter security key.
-
a b c d e f 1
g h i j k l 4
m n o p q r 7
s t u v w x y
 
A/a Space
done, use the ▲▼◄► buttons to select
Next, and then press the E button.
1 / 4
Refresh
WPS(PBC)
Previous
Next
Skip
0 entered WPS PIN
Previous
2 3
Next
5 6
Skip
8 9
z 0


2012-02-23 오후 2:23:11 2012-02-23 오후 2:23:11