Samsung HT-E5500 Mode D'emploi page 28

Settings
Audio
28
|
English
HT-E5500_XU_0223.indd 28 HT-E5500_XU_0223.indd 28
Speaker
You can set the speaker options.
Settings
Equaliser
Let you configure the Equaliser settings manually.
Lets you set the product so that the volume remains stable
Smart Volume when a scene change occurs or when you change the
channel.
Speaker Lets you select which speakers you want active, either the
Selection TV's speakers or the Home theater's speakers.
Lets you direct the sound from the TV to the Home Cinema
speakers. Requires an HDMI connection and an Audio Return
Channel (ARC) compatible TV.
• When Audio Return Channel set to on, use HDMI Cable to
Audio Return
connect the product to the TV. At this time, optical input
Channel
does not work.
• When Audio Return Channel set to auto, use HDMI Cable to
connect the product to the TV. At this time, ARC and optical
input is selected automatically.
Let you set the Digital Output to match the capabilities of the
Digital Output AV receiver you've connected to the product. For more details,
please refer to the digital output selection table. (See page 62)
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby True HD audio.
 Auto: Automatically controls the dynamic range of Dolby
TrueHD audio, based on information in the Dolby TrueHD
soundtrack. Also turns dynamic range control on for Dolby
Dynamic
Digital and Dolby Digital Plus.
Range Control
 Off: Leaves the dynamic range uncompressed, letting you
hear the original sound.
 On: Turns dynamic range control on for all three Dolby
formats. Quieter sounds are made louder and the volume of
loud sounds is reduced.
When the product is attached to a digital TV, lets you adjust
Audio Sync the audio delay so that the audio syncs with the video. You
can set the delay between 0 and 300 milliseconds.
2012-02-23 오후 2:23:35 2012-02-23 오후 2:23:35