The Initial Settings Procedure; The Home Screen - Samsung BD-E5900 Guide D'utilisation

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
player after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
The Initial Settings Procedure lets you set the OSD
and menu languages, configure the connection
to your home network, choose the aspect ratio
output (screen size and format) that is correct for
your TV, and apply an upgrade to your player's
software, if one is available.
| NOTE |
\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
24~26 for instructions.
\ If you want to display the Initial Settings screen again and
make changes, select Settings > System > Initial Settings in
the Home screen or select the Reset option. (See pages 21
or 23)
\ If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-CEC)-
compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the player.
3) Set the TV to the Initial Settings Procedure.

The Home Screen

Settings
Set various functions to suit your personal preferences.
1
Smart Hub AllShare Play
2
Smart Hub : Starts Smart Hub. From Smart Hub,
1
you can access YouTube, games, and other apps.
AllShare Play : Play videos, photos or music
2
content from Disc, USB, PC or mobile devices.
Settings : Set various functions to suit your
3
personal preferences.
` Selecting an Option on the Home Screen
1.
To select an option on the Home screen,
move the cursor using the ◄► buttons until
it highlights the option of your choice, and
then press the v button.
| NOTE |
\ If you leave the player in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the player is left in the screen saver mode for
more than 20 minutes, the power will automatically turn off.
3
17
|
English