Publicité
Les langues disponibles
Les langues disponibles
8. Troubleshooting
Problems
Dishwasher will not start
Dishes not clean
Chipping or breaking
glassware
Water remains in bottom
Keeping draining water
9. Technical data
Model : WP55G
Power input : 1280 W
Outer dimension : 475 x 480 x 445 mm
Weight : 22.5 Kg
Max. water consumption : 11 L
Water pressure : 0.03~1Mpa
Causes
- Dishwasher not receiving
electrical power.
- Door is unlatched.
- Dishwasher not level.
- Improper loading.
- Spray arm not rotating
freely.
- Not enough detergent and /
or improper detergent being
used.
- Improperly prepared
dishes.
- Water inlet hose kinked /
bent due to improper
installation.
- The filter loses its position.
Improper loading of dishes
- A small amount of water is
normal.
- Excessive amount of water,
cycle not completed.
- Pump is blocked.
- Too high water level.
Solutions
- Check electrical connection
fuse / circuit breaker.
- Close and latch door.
- Level unit.
- Arrange dishes so spray
action reaches all surfaces.
- Check spray arm to make
sure nothing is obstructing
spray arm rotation. Check if
filter screen has become
dislodged and obstructing
spray arm rotation.
- Use more detergent. Do not
use detergent that is hard or
cracked. Use only a
recommended dishwasher
detergent.
- Excess food soil and liquids
should be removed from
dishes before loading.
- Eliminate kink or bend from
inlet hose.
- Assure the filter in is right
position.
Do not overload dish rack.
Load glasses on the bottom
rack only.
- This is necessary to keep
the pump primed and is
drained automatically at the
beginning of each cycle.
- Allow dishwasher to
complete full cycle.
- Using clean water to clear
the filth of filter and water
sump by running a normal
washing cycle.
- Checking if there is
something wrong with inlet
valve.
15
Publicité
