Doro MemoryPlus 319i ph Mode D'emploi page 10

Connection
1. Connect the telephone cord to a telephone network
wall socket and to the
telephone.
2. Connect the spiral cord to the handset and to the
socket on the base of the telephone. See Technical
Information (6).
3. You will hear a click when the modular plug is correctly in
place.
4. Set correct Flash (R) button time to 100. See Technical
Information ().
5. Lift the handset and listen for the dial tone.
Memories
Saving speed dial numbers
1. Make sure that the
telephone is set to
2. Lift the receiver and press
hear in the earpiece).
3. Enter the phone number (up to 16 digits) using the
keypad. Press
4. Select memory position by pressing the corresponding
button.
5. Replace the handset. The number has now been saved.
Remember to return the
telephone (5) to the
numbers have been saved.
Press if you want a pause in the telephone number.
English
Settings
socket on the back of the
T
/ switch on the base of the
R P
. See Technical Information (5).
P
P
( ).
P R
/
R P
position when all the telephone
R

( ) (ignore anything you
R
switch on the base of the
q