Paramount JR42 Manuel De L'utilisateur page 20

Multi-functional Operating with Remote Control
4. Ember bed color options: Press
pink(E2),snow white(E3), cool blue(E4), dark blue(E5), green(E6), lake green(E7), auto rotating(EE), off(EO):
Icon
Ember bed light setting
Red
Pink
Snow white
Cool blue
Dark blue
Green
Lark green
Auto rotating
Off
NOTE: Flame, ember, backlight can be controlled individually.
5. Heater control options:
1. Ensure fireplaces displays "
2. Press the "
groups of heating system will be turned ON at 1500W by displaying "
the heater will be turned off,
3. Press " " button. This operation will decrease the temperature setting with low temperature status. One
group of heating system will be turned on at 750W by displaying
NOTE: Pressing the
6.Temperature control options:
Press the " " key to set the required room temperature. The parameters is pre-set in degrees Celsius
16-19-21-23-25-27-30-HO (indicate HO) as a repeat circulation.
Press key and hold for 5 seconds, a "beep" sound will be heard, which indicates a switch to Fahrenheit
degree of 61-66-70-73-77-80-86-HO (indicate HO) as a repeat circulation.
7.Heater lock and unlock control option:
Heater lock by using remote: Press "
temperature setting button will be locked. The heater will be in "OFF" mode and heater function is disabled,
which means the heater cannot be turned on unless preform "heater unlock" operation. "
when the heater is in the locked mode.
Heater unlock by using remote:
5 seconds, the heater function will be unlocked and will display "
function is activated. Heater operation is back to normal status.
" "
Heater lock function is a useful feature for those families with children, or for public commercial areas that
need the heating function.
don't don't
Flame and timer button operation will remain normal while the heater is locked or unlocked
If the heater is ON and flame is OFF, display shows current heater setting (H1 or H2), the "
display will not disappear until the flame is turned on.
App operation will not be effected by lock or unlock feature.
Page 20
button multiple times to cycle through the ember bed color from red(E1),
" mode
ON
"heater ON/OFF. When press once, the heater is ON with high temperature status. Two
displaying " ".
HO
"
"
"
"
or a second time will turn off the heater.
When the unit is in heater lock mode, press the
" "
"
"
Display
E1
E2
E3
E4
E5
E6
E7
EE
EO
H2
.
H1
"button and hold for 5 seconds, the heater and related
". Heater and related temperature setting
UL
" " "
". When press
" will display
LO
key again and hold for
button again,
03.16.21