Paramount JR42 Manuel De L'utilisateur page 19

Multi-functional Operating with Remote Control
Turning ON/OFF the fireplace:
1.Ensure the fireplace is at "power on" status. (refer to "
2.Press power on/off button to turn on the fireplace. LED displays "
3.Initial setting: Heater is off. Flame at the brightest level with red/blue/yellow flame on.
Backlight is on with red/yellow/ blue combination. Ember bed color is white.
Note: Memory setting feature
turning on the fireplaces by using the remote control, the existing flame, ember, backlight
will resume to the previous setting.
Flame, ember and backlight color changing:
Ensure fireplaces displays "
All light source ON/OFF :
simultaneously.
Off mode will display
1. Flame color options:
Press the " " button multiple times to cycle yellow color flame through 4 different
brightness levels , y4-y3-y2-y1-y0, with y4 (the brightest), y0 (OFF)
Press the " " button multiple times to cycle yellow color flame through 4 different
brightness levels ,b4-b3-b2-b1-b0, with b4(the brightest), b0 (OFF)
Press the " " button multiple times to cycle yellow color flame through 4 different
brightness levels , r4-r3-r2-r1-r0, with r4(the brightest), r0 (OFF)
2. Timer options: Press the "
30min, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h, 00
3. Backlight color options: Press the "
lights through red (C1), red/blue (C2),red/yellow/blue (C3),yellow/blue (C4),blue (C5),
yellow (C6),red/yellow( C7), fade (CE),OFF (C0)
Icon
Backlight setting
Red
Red/Blue
Red/Yellow/Blue
Yellow/Blue
Blue
Yellow
Red/Yellow
Auto rotating
Off
03.16.21
if the fireplace is turned off by using remote control, when
" mode.
ON
button can turn on/off the flame, ember and backlight
FF and On mode will display
" button multiple times to set operating timing duration to
" button multiple times to cycle the back LED
Display
C1
C2
C3
C4
C5
C6
C7
CE
CO
" on page 16).
Main Power Switch
".
ON
.
FO
Page 19