Paramount JR42 Manuel De L'utilisateur page 15

Crystal embers and Log set Installations
The glass front must be removed and the appliance must be secured in its
embers are installed.
1.Crystal installation
Carefully place crystal embers into the bottom media tray on the front of the appliance as illustrated.
Apply an even layer from side to side.
2.Log set installation
Apply an even layer of crystal from side to side , randomly place the log (J logs or K logs, refer to page 5)
pieces included in the packaging on top of the crystal medias. Use the crystal to fill in spaces between the
logs. This will improve the overall look of the fireplaces.
EF-WM353 XIN (42") x4 (J logs)
EF-WM350 XIN (50") x4 (J logs)
EF-WM349 XIN (60") x5 (K logs)
EF-WM348 XIN (72") x5 (K logs)
LED Back Light Removal
1. Unscrew the two screws in Figure A.
2. Lift off the LED cover and remove in Figure B.
3. Disconnect the wires where connected to the circuit board in Figure C.The disassembly is complete.
03.16.21
Figure A
Figure B
location before the crystal
Figure C
Page 15