General Features; Power Supply Cord; Putting The Machine Out Of Service - mastro 40M Mode D'emploi

once a day and, if necessary more often.
•
All the machine parts, that are in contact with the product, must be cleaned
accurately .
•
Never clean the machine by means of compressed water or water jets, but with
water and neutral detergent. It is forbidden to use other detergent products.
Do not use brushes or others tools that could damage the machine.
WARNING : Pay attention to the residual risks due to the cutting and/or
sharp parts of the machine.
CHAP. 7 - MAINTENANCE

7.1 - GENERAL FEATURES

Before performing any maintenance operations, it is necessary to disconnect the
plug from the socket to insulate completely the machine from the rest of the
system.
7.2 - FEET
Feet may be deteriorated or loose their elasticity, thus reducing the stability of the
machine. In this case, please call the "SERVICE CENTRE" to have it repair.

7.3 - POWER SUPPLY CORD

Periodically check whether the power supply cord is worn-out and, if this is the
case, please call the "SERVICE CENTRE" to have it replaced.
CHAP. 8 - DISPOSAL OF THE MACHINE

8.1 - PUTTING THE MACHINE OUT OF SERVICE

If for some reason, you decide to put the machine out of service, make sure
nobody can use it: disconnect it from the mains and eliminate the electrical
connections.
8.2 - DISPOSAL
When the machine is out of service, it can be eliminated. To dismantle the
machine contact a Specialized Centre, paying attention to the different materials
used (see chap. 1 par. 3.2).
16
OPERATING AND MAINTENANCE MANUAL
40M
45C
',63(16(5
1
45K
51M