Cleaning The Motor Protection Filter - Bosch Perfectionist BGL8 Série Mode D'emploi

Changing the filter
21
2
1
2
Click!
18 18
Motor protection filter
!
Caution: The vacuum must not be operated without
1
the motor protection filter.
Cleaning the motor protection filter
The motor protection filter should be cleaned regularly
by tapping out the dirt and rinsing.
21
Fig.
Open the dust bag compartment lid. Fig.
Release the motor protection filter by pulling on the
side tabs and pull it out in the direction of the arrow.
Disconnect the motor protection filter from the Bio-
nic filter.
Clean the motor protection filter by tapping out the
dirt.
If it is very dirty, the motor protection filter should
be rinsed.
24h
The filter must then be left to dry for at least 24 hours.
Drying
After cleaning, place the motor protection filter into
the appliance.
2
Close the dust bag compartment lid.
en
19