Warn 78395 Instructions De Montage page 4

V. INSTALLATION
1. Locate factory skid plate under ATV see Figure 1.
2. Place plow mounting bracket (A1) so that rear of
bracket rests on "lip" of factory skid plate, see
Figure 1 and Figure 2.
Next, slide plow mounting plate (A1) to the left
so that the right tab rests against frame, see
Figure 2. Mark holes for drilling, See Figure 2.
3. Using a 23/64 drill bit, drill holes into factory
skid plate marked in step two.
Note: Make sure area behind factory skid
plate is clear before drilling.
WARN INDUSTRIES
Factory skid plate
Tab to rest against
frame
Mark holes for
drilling
PAGE 4
Front of ATV
Figure 1
Factory skid Plate
Figure 2
Drill with 23/64" drill bit
Figure 3
78391A1