Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION CONT.
4. Attach plow mounting bracket to factory skid plate
using two 5/16-18x1" hex head bolts (D1), two
5/16" flat washers (D2) and two 5/16-18 lock nuts
(D3), see Figure 4. Torque to specifications on
page two.
5. Place clamp bracket (A2) over frame, behind tabs
of plow mounting bracket (A1), see Figure 5.
6. Assemble clamp bracket (A2) to plow mounting
bracket (A1) using four 1/4-20x1" hex head bolts
(B1), four 1/4" flat washers (B2) and four 1/4-20
lock nuts (B3). Torque to specifications on page
three. See Figure 6.
7. Assemble center of plow mounting bracket (A1) to
clamp bracket (A2) using one 5/16-18x2" hex
head bolt (C1) and one 5/16 lock washer (D2) and
one 5/16-18 lock nut (D3), see Figure 7. Torque
bolt to specifications found on page two.
WARN INDUSTRIES
Clamp Bracket
PAGE 5
5/16" Hardware
Figure 4
Plow Mount
Figure 5
1/4"-20 Hardware
Figure 6
78391A1
Publicité
Table des Matières
