Software Upgrade - Samsung 6 Serie Mode D'emploi

■ Signal Information (digital channels only)
Unlike analogue channels, which can vary in reception quality from 'snowy' to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
N
Continue to adjust the antenna until you find the best position with the strongest signal.
❑

Software Upgrade

Samsung may offer upgrades for the TV's firmware in the future. These upgrades can be
performed via the TV when it is connected to the Internet, or by downloading the new firmware
from samsung.com to a USB memory device.
Current Version is the software already installed in the TV.
N
Alternative Software (Backup) shows the previous version that will be replaced.
N
Software is represented as 'Year/Month/Day_Version'. The more recent the date, the newer
N
the software version. Installing the latest version is recommended.
■ By USB
Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the
TV. Please be careful to not disconnect the power or remove the USB drive while upgrades
are being applied. The TV will turn off and turn on automatically after completing the firmware
upgrade. Please check the firmware version after the upgrades are complete (the new version
will have a higher number than the older version).
When software is upgraded, video and audio settings you have made will return to their default
(factory) settings. We recommend you write down your settings so that you can easily reset
them after the upgrade.
■ By Channel
Upgrades the software using the broadcasting signal.
If the function is selected during the software transmission period, this function searches for available software and downloads
N
the software.
The time required to download the software is determined by the signal status.
N
■ Standby Mode Upgrade
To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby
mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LED product. This phenomenon may continue for more than 1 hour until the software upgrade is completed.
■ Alternative Software (Backup)
If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version.
N
If software was changed, existing software is displayed.
You can change current software to alternative software by 'Alternative Software'.
N
❑
HD Connection Guide
This menu presents the connection method that provides the optimal quality for the HD TV. Refer to this information when
connecting external devices to the TV.
❑
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can view the
information regarding the call centre, product and software file download method.
English - 2
TV Rear Panel
USB Drive
Software Upgrade
Current Version 2009/01/18_000001
By USB ▶
By Channel
Standby Mode Upgrade : 45 Min
Alternative Software 2009/01/15_00000
U Move E Enter R Return