Setting Up Anynet - Samsung 6 Serie Mode D'emploi

1. Connect the HDMI IN (1(DVI), 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet + device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet + device using an HDMI
cable.
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on
N
the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
N
Home Theatre's Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
N
Connect only one Home Theatre.
You can connect an Anynet + device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet + functions.
N
Anynet + works when the AV device supporting Anynet + is in the Standby or On status.
N
Anynet + supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
N
¦

Setting Up Anynet +

Press the TOOLS button to display the Tools menu. You can also display Anynet + menu
T
by selecting Tools → Anynet + (HDMI-CEC).
❑
Setup
Anynet + (HDMI-CEC) → Off / On
■
To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On.
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related operations
N
are deactivated.
Auto Turn Off → No / Yes
■
Setting an Anynet + Device to turn Off automatically when the TV is turned Off.
The active source on the TV remote must be set to TV to use the Anynet + function.
N
N
If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
English - 3
Media Play (USB)
Anynet + (HDMI-CEC)
Setup
Anynet + (HDMI-CEC)
: On ▶
Auto Turn Off : Yes
U Move E Enter R Return
Setup
Anynet + (HDMI-CEC)
: On
Auto Turn Off : Yes ▶
U Move E Enter R Return