Commissioning; Safety Information; Delivery Scope And Transport Inspection; Unpacking - CASO DESIGN Selection C 10 Thermo Mode D'emploi

DANGER
► Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if live
connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device
can also occur.
► Do not put the machine, power cord or plug in water or any
other liquid.
► Be careful and avoid water spillage on the plug.
► Pull out the mains plug before cleaning the device.

12 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

12.1 Safety information

► Packaging materials may not be used for playing. There is a danger of suffocation.

12.2 Delivery scope and transport inspection

As a rule, the device is delivered with the following components:
• Selection C 10 Thermo
• Filterholder with permanent filter
• Coffee spoon
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

12.3 Unpacking

To unpack the device, proceed as follows:
• Remove the device out of the carton and remove the packaging material.
Warning
• insulated jug
• Operating Instructions
Please note
30