Figure 5-31: Confirm New Settings Screen; Figure 5-32: Congratulations Screen - Cisco Systems Linksys WPC54GX4 Mode D'emploi

Wireless-G Notebook Adapter with SRX400
5. The next screen displays all of the Adapter's settings. If these are correct, click Save to save these settings to
your hard drive. If these settings are not correct, click Back to change your settings.
6. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to
Network to connect to your network. Click Return to Profiles screen to open the Wireless Network
Monitor's Profiles screen.
Congratulations! The profile is complete.
Chapter 5: Using the Wireless Network Monitor
Creating a New Profile

Figure 5-31: Confirm New Settings Screen

Figure 5-32: Congratulations Screen

33