Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Noise
Applicable standard : EN60335
ELM4121
ELM4620
ELM4621
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
The noise emission during actual use of the power tool can differ from the declared val-
WARNING:
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60335:
Model ELM4121
Vibration emission (a
) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
Model ELM4620
Vibration emission (a
) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
Model ELM4621
Vibration emission (a
) : 2.5 m/s
h
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
The vibration emission during
WARNING:
actual use of the power tool can differ from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Model
2
or less
2
2
or less
2
2
or less
2
Sound pressure level
L
(dB(A))
Uncertainty K
PA
(dB(A))
84
83
83
SAFETY WARNINGS
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
Children should be supervised to ensure that
1.
they do not play with the mower.
Never allow children or people unfamiliar with
2.
these instructions to use the mower. Local
regulations can restrict the age of the operator.
Never operate the mower while people, espe-
3.
cially children, or pets are nearby.
4.
Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
While operating the mower, always wear sub-
5.
stantial footwear and long trousers. Do not
operate the mower when barefoot or wearing
open sandals. Avoid wearing clothing or jew-
elry that is loose fitting or that has hanging
cords or ties. They can be caught in moving
parts.
Always wear protective goggles to protect
6.
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
11 ENGLISH
Sound power level
L
(dB(A))
Uncertainty K
PA
3
95
3
95
3
95
(dB(A))
1
1
1
Publicité
Table des Matières
