Mounting Steps; Preparation - Team kalorik GBBQ 1004 Mode D'emploi

PRODUCT TYPE
MODEL
Total Nominal Heat Inputs
CATEGORY
GAS TYPE
P (mbar)
Injector Size (Diameter)
Country code

MOUNTING STEPS

Make sure your grill is assembled properly. Detailed assembly instructions are packed with
each grill giving specific assembly procedures for each model. Follow these instructions
carefully to ensure the correct and safe assembly of the grill.
Caution: Although we take every effort to ensure that the assembly process is as easy as
possible, it is inherent with fabricated steel parts that corners and edged can cause cuts if
improperly handled during assembly procedures. Be careful while handling any parts during
assembly. It is strongly recommended that you protect hands with a pair of work gloves.

PREPARATION

You will need LPG gas bottle and proper regulators under the gas pressure to operate this gas
grill. The regulators should be comply with EN16129 with current version and national regulation.
ENERGY SAVING TIPS
Reduce the opening time of the lid.
Turn the grill off as soon as cooking is completed.
Preheat the gas grill for 10 to 15 minutes only.
(Except for the first use)
Do not preheat longer then recommended.
Do not use a higher setting than required.
Connect the hose and regulator to the gas container at the left side of the gas grill .Keeping in
mind that the gas container must be kept away from heat and in a safe position .The hose
dimension is 8-10mm diameter. The Length of hose recommended which shall not exceed
1.5m.
Gas Barbecue
TKG GBBQ 1004
9.0 kW (642 g/u)
I
3+(28-30/37)
Butane
28-30 mbar
Grill: 0,86mm
I
3+(28-30/37) BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU,
LV, PT, SK en SI.
I
3B/P(30) BE, CY, DK, EE, FI, FR, HU, IT, LT, NL, NO, SE, SI, SK,
RO, HR, TR, BG, IS, LU en MT.
11
Propane
37 mbar
0063-16
GBBQ 1004
I
3B/P(30)
Propane,
butane or
mixed
30 mbar
- 190108